Residents of Kingwood, TX, Humble, TX, Atascocita, TX, Spring, TX, Houston, TX and surrounding areas can have their property value increased by as much as $2500.00 by having the exterior and roof of their home cleaned by Clean and Green Solutions, of Kingwood Tx.
Clean and Green Solutions, of Kingwood, TX, uses a "SOFT WASH" cleaning method for cleaning shingle and tile roofs. Our "SOFT WASH" method means we DO NOT use high pressure to clean one of your largest investments, your home. We use a proproietary blend of cleaning solutions and methods that are safe for the environment including your plants, pet's, and your home.
Clean and Green Solutions, of Kingwood, TX is proud to be referred by many area Real Estate professionals. We take great pride in working with the many Real Estate professionals as well as homeowners in and around the Kingwood, TX community
Call Clean and Green Solutions, of Kingwood, TX at 281.883.8470 for a FREE ESTIMATE today and we can have your home looking like new.
Showing posts with label Mold and Mildew Removal. Show all posts
Showing posts with label Mold and Mildew Removal. Show all posts
Saturday, January 15, 2011
Friday, December 10, 2010
Super Fresh™ Removes ODORS Caused by Top Load Washing Machines
Right Picture: View of inside gasket showing mold and mildew.
If you own a high efficiency front load washing machine then you have probably been very pleased with the fact that these washing machines clean your clothing better with less water, come out of the washing machine dryer due to a high speed final spin cycle, which allows for less drying time, as well as many other energy saving features.
One thing you may not be happy about is the fact that these washing machines can and will cause your laundry area as well as your clothes to have a mold or mildew type smell.
This odor is caused by the gasket that is located immediately inside the front door. As you will see in the pictures, the inner lining of the gasket is manufactured in such a way that water can collect at the bottom of the gasket causing the water to sit between loads. Couple that with the fact that the area inside the gasket get’s no light, is damp, and cool, and you have a perfect breeding ground for mold spores to form and grow.
Manufactures of these washers suggest that you always leave the door slightly ajar to allow air in. The manufactures also sell small tablets that you are to use every two to three weeks to help clean the inside of the gasket. While doing these two things may help, they do not totally remove the mold or the odor.
Here is how to get rid of the odor: The inside of the gasket must be thoroughly cleaned using our EATOILS™ Super Fresh™ Certified Green Cleaning Solution. Mix at 4 ounces to a gallon of water and clean the inside of the gasket using a small soft bristled brush and a rag. First spray liberally inside the gasket with the diluted Super Fresh™ solution, then lightly scrub with the soft bristled brush, let sit about 10-15 minutes and then wipe with a damp rag. You will be amazed at the amount of Mold and Mildew that you will remove. After thoroughly cleaning, spray some more of the Super Fresh™ inside the whole circumference of the gasket and let air dry. At this point the Mold and Mildew will be killed and removed from the gasket along with the odor.
If you are unable to perform this cleaning task, please feel free to call us at Clean and Green Solutions, 281.883.8470, and we will be glad to send out a service tech to perform this for you at a nominal service charge.
Once you are done cleaning the gasket, you can spray any clothing or towels that may have absorbed the odor. Using your spray bottle, mist the clothing or towel items just until lightly damp and this will remove any residual odor. Remember the Super Carpet Fresh is Certified Green and will not harm you or your clothing. After treating the clothing or towels you may choose to launder again but this is not necessary.
To keep the Mold, Mildew, and Odor from returning spray some of the EATOILS™ Super Fresh™ diluted at 2 ounces per gallon of water inside the gasket every 1-2 weeks and continue to keep the door slightly open when the machine is not in use, per manufacture instructions.
Here is what one client wrote to us just yesterday, "Thanks Doug Rucker and "Clean and Green Solutions" for making my washer not so stinky! Your odor removal product ROCKS!!!! (and it's green...yea for me!)"
Mrs. C. Wheeler, Splendora, Tx.
EATOILS™ Super Fresh™ is an excellent cleaning product for kitchen, bathroom, tile and grout, carpeting, upholstery, clothing and fabric cleaning challenges. Super Fresh™ will also remove any odor on contact including SKUNK odor.
For more information on the EATOILS™ Super Fresh™ Certified Green Cleaning product, it’s many uses, as well as all our other Certified Green Cleaning products, please feel free to call us at 281.883.8470 and visit us at www.cleanandgreensolutions.com.
Tuesday, August 31, 2010
Order your SUPERFRESH from Clean and Green Solutions Today
Tuesday, August 31, 2010
EATOILS™ SUPERFRESH™ Removes Even The Worst Black Mold Found In Florida
BEFORE Brown Mold On Awning - Mobile, AL AFTER
Enclosed areas where moisture can build up can be a breeding ground for mold and mildew. Particularly in locations where wood and wallboard are exposed, like: 1) under rafters, 2) in damp basement areas, 3) in bathrooms, 4) below open buildings and 5) in attics.
Mold & Mildew can be harmful to you and your family as the spores can cause allergic reactions and illness. There are two problems that you need to deal with when you are trying to address mold and mildew: 1) removing the infestation effectively (mold and spores), and 2) preventing it from recurring.
REMOVAL: - In the past, most mold removal companies literally had to remove the offensive building materials, address the source of the moisture and rebuild the structure - a very expensive proposition. If the infestation was small it could be treated with bleach or disinfectant products, however, the problems with bleach & disinfectants can be just as dangerous as the infestation - affecting breathing and damaging the building materials - plus the effects of these products are only momentary and there is no lasting effect. Recent developments in microbial cleaning products have yielded effective long term results with the added bonus of prevention of recurrence (when the source of the moisture is repaired). These products remove the infestation and, virtually stand guard, defending the area from re infestation from the spores.
PREVENTION: - Once you remove the source of the moisture you have effectively prevented the mold from recurring however, particularly in areas where there is no resolution to the moisture issue (enclosed bathrooms) the mold will return the next time it is moist. Microbial cleaning products are particularly effective in these instances as they can protect the area from some of the recurrence and regular, weekly cleaning with the product can actually prevent it completely.
Many mold abatement contractors have discovered the advantages of using microbial cleaning products to treat these mold problems effectively. Over the past few years WorldWare Enterprises Ltd. of Cambridge, Ontario, Canada has developed a number of green microbial products that work well on mold and mildew. Depending on the actual mold encountered, we have products that will effectively remove and prevent the recurrence of these infestations for years to come.
The success stories for treating northern grey/black mold and southern brown mold have been impressive as infestations have been stopped and reversed with as little as one application. We have written here before about the results for removing brown mold from awnings in Mobile, AL (see picture above, showing before and after) - update: it was over 1-1/2 years ago that the vinyl awning was treated and, as of last week, there is still no recurrence on the awnings (in the same time period neighbors with the same type of awnings have had their awnings treated with harsh chemicals at least 5 times and the mold keeps coming back!).
For some time now the most difficult mold type to resolve has been the black mold that is common in many parts of Florida. It is a very resistant mold that is very hard to remove with any success. Recent trials and actual case studies have proven that EATOILS™ SUPERFRESH™ is very effective at removing and preventing the recurrence of this black mold in Florida. For example, our client, William Booth of Tallahassee, FL was having a problem with mold on his exposed wood on the underside of his home. The smell and spores were affecting his family and he had to do something fast! He called our technical service personnel and was advised that we had experienced some success with our EATOILS™ SUPERFRESH™ for this type of application (this product is very good at treating the mold and mildew typically found in damp bathrooms). He purchased a pail of our EATOILS™ SUPERFRESH™ and he set to work on his home - he mixed it as described in the instructions and then he applied it to the exposed wood - and within minutes he noticed a big reduction in the mold. After a second application it was all gone and there has been no recurrence since he treated the wood in April. We spoke last week and he confirmed that he is very happy with the results - another fine job by EATOILS™ SUPERFRESH™.
For more information or to place an order visit us at www.cleanandgreensolutions.com or call 281.883.8470
EATOILS™ SUPERFRESH™ Removes Even The Worst Black Mold Found In Florida
BEFORE Brown Mold On Awning - Mobile, AL AFTER
Enclosed areas where moisture can build up can be a breeding ground for mold and mildew. Particularly in locations where wood and wallboard are exposed, like: 1) under rafters, 2) in damp basement areas, 3) in bathrooms, 4) below open buildings and 5) in attics.
Mold & Mildew can be harmful to you and your family as the spores can cause allergic reactions and illness. There are two problems that you need to deal with when you are trying to address mold and mildew: 1) removing the infestation effectively (mold and spores), and 2) preventing it from recurring.
REMOVAL: - In the past, most mold removal companies literally had to remove the offensive building materials, address the source of the moisture and rebuild the structure - a very expensive proposition. If the infestation was small it could be treated with bleach or disinfectant products, however, the problems with bleach & disinfectants can be just as dangerous as the infestation - affecting breathing and damaging the building materials - plus the effects of these products are only momentary and there is no lasting effect. Recent developments in microbial cleaning products have yielded effective long term results with the added bonus of prevention of recurrence (when the source of the moisture is repaired). These products remove the infestation and, virtually stand guard, defending the area from re infestation from the spores.
PREVENTION: - Once you remove the source of the moisture you have effectively prevented the mold from recurring however, particularly in areas where there is no resolution to the moisture issue (enclosed bathrooms) the mold will return the next time it is moist. Microbial cleaning products are particularly effective in these instances as they can protect the area from some of the recurrence and regular, weekly cleaning with the product can actually prevent it completely.
Many mold abatement contractors have discovered the advantages of using microbial cleaning products to treat these mold problems effectively. Over the past few years WorldWare Enterprises Ltd. of Cambridge, Ontario, Canada has developed a number of green microbial products that work well on mold and mildew. Depending on the actual mold encountered, we have products that will effectively remove and prevent the recurrence of these infestations for years to come.
The success stories for treating northern grey/black mold and southern brown mold have been impressive as infestations have been stopped and reversed with as little as one application. We have written here before about the results for removing brown mold from awnings in Mobile, AL (see picture above, showing before and after) - update: it was over 1-1/2 years ago that the vinyl awning was treated and, as of last week, there is still no recurrence on the awnings (in the same time period neighbors with the same type of awnings have had their awnings treated with harsh chemicals at least 5 times and the mold keeps coming back!).
For some time now the most difficult mold type to resolve has been the black mold that is common in many parts of Florida. It is a very resistant mold that is very hard to remove with any success. Recent trials and actual case studies have proven that EATOILS™ SUPERFRESH™ is very effective at removing and preventing the recurrence of this black mold in Florida. For example, our client, William Booth of Tallahassee, FL was having a problem with mold on his exposed wood on the underside of his home. The smell and spores were affecting his family and he had to do something fast! He called our technical service personnel and was advised that we had experienced some success with our EATOILS™ SUPERFRESH™ for this type of application (this product is very good at treating the mold and mildew typically found in damp bathrooms). He purchased a pail of our EATOILS™ SUPERFRESH™ and he set to work on his home - he mixed it as described in the instructions and then he applied it to the exposed wood - and within minutes he noticed a big reduction in the mold. After a second application it was all gone and there has been no recurrence since he treated the wood in April. We spoke last week and he confirmed that he is very happy with the results - another fine job by EATOILS™ SUPERFRESH™.
For more information or to place an order visit us at www.cleanandgreensolutions.com or call 281.883.8470
Tuesday, July 13, 2010
EATOILS BT200 Cleans up Austin Stone Siding Home
Eatoils BT200 cleans this Austin Stone side house located in Houston, TX.
Clean and Green Solutions, the Houston, TX based distributor for EATOILS cleaning products was called to this home to provide an estimate to clean the Austin Stone siding on the exterior of the house. Betsie Weathorford called Clean and Green Solutions after seeing our website at www.cleanandgreensolutions.com. Ms. Weatherford was impressed with the web site and the fact that we only use the EATOILS brand of CERTIFIED GREEN Cleaning Products. Several areas of the home were badly stained with Mold and Mildew as you see in the picture above. Ms. Weatherford did NOT want a company using dangerous, toxic chemicals or bleach to remove the stains. Here is how we did it: We mixed the EATOILS BT200 at 4 ounces to a gallon of water. Using a pump up garden type sprayer we applied the BT200 solution to the stains and brushed in using a street broom. We then waited approximatley 20-30 minutes and rinsed the stains off using a power washer at very lower pressure.
Ms. Weatherford was extremely happy with the outcome and the peace of mind that her home was not cleaned with the use of dangerous chemicals.
For more information please contact us at 281.883.8470 or visit us at www.cleanandgreensolutions.com.
Labels:
Austin Stone,
BT200,
EATOILS,
Mold and Mildew Removal
Wednesday, May 19, 2010
Cleaning a Trex Deck with BT200
Trex is the leading brand of alternative decking, railing, fencing, and trim products designed to maximize your outdoor living experience.
Trex composite products are made of a unique combination of wood and plastic fibers. Trex gets its plastic and wood fibers from reclaimed or recycled resources. Including sawdust and used pallets from woodworking operations, and recycled plastic grocery bags from all over the country.
According to the Trex Website, the are a variety of ways and harmful chemicals that are to be used when cleaning a Trex Deck. Deck Brightners, Bleach, and even cleaners containing dangerous acids are recommended by Trex to clean mold and mildew, grease, oil, food stains, and many others.
Well, we have great news for you. The EATOILS BT200 Certified GREEN degreaser is the ONLY product that you need.
Recently Pro Power Wash, a sister company of Clean and Green Solutions, of Porter, TX was called to the home of Mrs. Kathy Sexton, of Kingwood, TX. Mrs. Sexton had tried 4 other cleaning companies try to clean her TREX Deck and all produced unsatisfactory results. Basically, they could not get it clean, even using bleach.
Pro Power Wash used the EATOILS BT200 Green Degreaser at a rate of 6 ounces of BT200 to 1 gallon of water. (Total Used was 12 ounces and 2 gallons of water). Using a garden type pump up sprayer, the BT200 solution was sprayed on the deck in small areas at a time. The solution was then agitated into the deck lightly with the use of a street broom, just until a white lather formed. The BT200 was allowed to sit for approximately 15-20 minutes and then rinsed with a power washer lightly using no more than 1000 PSI at about 1-2 feet from the surface.
Mrs. Sexton was extremely satisfied and could not believe the results. She has also purchased a quart of the BT200. Because of how easy the BT200 is to use, not to mention that is totally safe, she will now be able to keep her TREX Deck clean herself year round.
(The dark spot in the after picutre is water that leaked form a garden hose as the workers put it away)
For more information please vist us at www.cleanandgreensolutions.com or call us at 281.883.8470
Subscribe to:
Posts (Atom)