EATOILS Bio-Blast loosens cob webs for easy removal

EATOILS BIO BLAST makes for

easy work when removing Cob Web
infestations.

Clean and Green Solutions, the Houston,TX distributor for EATOILS Certified GREEN Cleaning products was recent called out to this home in Kingwood, TX. The owner of the property had just listed the home for sale and needed an environmentally safe way to remove the cob web infestation as you see in the pictures. Most exterior cleaning service companies will use bleach diluted with water to remove cob webs. The problem with using bleach to remove cob webs is that you have to use way more bleach than water. Usually about 75% bleach to water. Then, when you apply the bleach and water mixture to the exterior of the home the mixture will fall onto all the vegetation below the house. Even if you were to cover the landscape, you will still get bleach in the vegetation as it runs off the tarps or covering as well as when you remove the covering. This is a very unsafe way to remove cob webs, not only for the user but for the environment as well.

Here is how Clean and Green Solutions removed the cob webs in an environmentally safe way: We filled a five gallon bucket with water till it was 75% full, and then added 1/2 gallon of EATOILS BIO-BLAST. Using a power washer, (3500 psi, 6gpm) equipped with a DOWNSTREAM chemical injector placed at the first 50 feet of hose, we thoroughly applied the BIO-BLAST to the exterior of the home. Then using a zero degree tip and keeping the wand approximately 10 feet from the house, working top to bottom, the cob webs easily fell off the house. We have used EATOILS BIO-BLAST many times for cob web removal and have always found it to be the most economical and safest way to remove cob webs whether the infestation is heavy or light.

On one story homes the use of a pressure washer is not required. Simply mix the EATOILS BIO-BLAST in a garden type pump up sprayer at 6 ounces to a gallon of water. Spray on the cob webs, then remove with a garden hose or broom.

You will find many more uses for EATOILS BIO-BLAST around your home than just for cob web removal. BIO-BLAST will remove the strongest of odors, returns tile and grout to it's original color and beauty, and is an excellent environmentally safe drain and septic maintenance treatment.

For more information on the EATOILS BIO-BLAST product, as well as our many other Certified GREEN cleaning products, call us at 281.883.8470 or visit us at http://www.cleanandgreensolutuions.com/

EATOILS BT200 Cleans up Austin Stone Siding Home

Eatoils BT200 cleans this Austin Stone side house located in Houston, TX.

Clean and Green Solutions, the Houston, TX based distributor for EATOILS cleaning products was called to this home to provide an estimate to clean the Austin Stone siding on the exterior of the house. Betsie Weathorford called Clean and Green Solutions after seeing our website at www.cleanandgreensolutions.com. Ms. Weatherford was impressed with the web site and the fact that we only use the EATOILS brand of CERTIFIED GREEN Cleaning Products. Several areas of the home were badly stained with Mold and Mildew as you see in the picture above. Ms. Weatherford did NOT want a company using dangerous, toxic chemicals or bleach to remove the stains. Here is how we did it: We mixed the EATOILS BT200 at 4 ounces to a gallon of water. Using a pump up garden type sprayer we applied the BT200 solution to the stains and brushed in using a street broom. We then waited approximatley 20-30 minutes and rinsed the stains off using a power washer at very lower pressure.

Ms. Weatherford was extremely happy with the outcome and the peace of mind that her home was not cleaned with the use of dangerous chemicals.

For more information please contact us at 281.883.8470 or visit us at www.cleanandgreensolutions.com.

Clean and Green Solutions EATOILS Products Move Up In Priority For Gulf Oil Spill Response

This week we heard back from Horizon - the company that owns the rig that was sitting on top of the well that is now leaking into the Gulf Of Mexico - they have advised us that we have moved up on the list of priority of products being assessed for response to the gulf oil spill.

Well, it's only been 5 weeks since we filled out the internet form that provided them with the information about our technology and no one has picked up a phone to call. We have 4 people on the ground in the gulf states but no one is getting close to speaking with anyone about how our products can save some serious money.

We have shown the products to emergency response contractors and to some political folks, and the Coast Guard has run a small test, but we can't seem to get anywhere near the BP Oil people to discuss this huge problem.

We have an absorbent - MULTIZORB™ SELECT™ OIL ONLY that will pick up the oil off the surface of the water before it gets to the shoreline. It also works in the marshes and on the shore to mitigate the effects of the spill. It can be easily distributed onto the water or sand or into the marshes and it can be easily retrieved for disposal. This product has been successfully used in virtually every major oil spill since the Exxon Valdez and it was used last month in Australia to mitigate their oil spill. It is made from a renewable resource - so supply is virtually unlimited, and it is environmentally safe and friendly to all forms of wildlife. It is used to neutralize nuclear waste and it is landfill friendly. Most importantly, it is less expensive than alternative methods for capturing and disposing of oil products.

After you have used the absorbent, we have a complete range of oil eating microbes in our EATOILS™ line of products that can safely digest the residual oil and treat the water to remove any residue naturally. This is an ideal approach to treating the marshes and coastal areas and for any pockets of contamination that may develop. We also have products that combine the oil eating microbes with safe surfactants to clean up the areas, birds and other wildlife in a timely manner. These products are also used successfully to remediate oil spills on land and they have been used successfully in bioremediation projects for many years.

We are not alone in this. Every time a spill occurs the oil companies use the same old technologies to deal with the spills -
1) wait for calm seas, usually up to 3 weeks,
2) apply a dispersant as quickly as possible to minimize the PR impact of the spill, usually 2-3 weeks,
3) play the blame game so they don't have to pay for the clean-up, starts at week one and continues until bancruptcy is declared (see point #9),
4) close off all communications with any outsiders so that no new technologies can be tried, keep head in sand for at least 4 weeks,
5) wait for political pressure before trying alternative methods, usually kicks in at 4 weeks,
6) keep the people with new technologies at bay by setting up a complicated assessment process that will tie them up in red tape until it is too late to address the current problem, this is a new wrinkle with this spill - it started on day 3 - and we are now at day 45 and we just heard that our technology is moving up one level (to level 3 of 5),
7) keep applying dispersants until the Coast Guard or the Government tells them to stop (by then the dispersants will have killed or poisoned much of the natural aquatic life in the area), it took 35 days this time, yet they are still applying dispersants today as far as I know,
8) pay people to stand around and look at the disaster and don't provide them with the tools and products they need to address the problem, still happening today as they wait for the oil to come ashore,
9) file for bancruptcy before the real charges for cleaning up the mess are assessed,
10) let the government step in and make an even bigger mess of this problem.

The time has come for the oil industry to come together and jointly assess all of the new spill response technologies so that the right products can be used quickly to control environmental damage and to reduce the costs of these horrific disasters caused by oil. We have the technologies to deal with this now and we can be good stewards of our planet if we will only act responsibly.

For more information about our products please visit our website at http://www.cleanandgreensolutions.com or call us toll free at 281.883.8470.

Cleaning Ovens is Easier and Safer with BT200

This oven was cleaned for a customer using EATOILS BT200 Certified Green Degreaser. After many attempts to clean this oven using store bought products like "Easy Off" and others that contain dangerous toxins and chemicals, take a long time to clean as the product has to dwell, and then leave that terrible residual smell when you use the oven again, the EATOILS BT200 cleaned this oven in 15 minutes. It even performed better than using the self cleaning option as the oven did not have to heat up to almost 700 degrees to bake the caked on burnt food, wasting valuable electricity, not to mention the 6-8 hours it takes to perform the self cleaning cycle and the heat it generates in the house.

Here is how we did it. We mixed the EATOILS BT200 at 6 ounces to a gallon of water and then thoroughly sprayed the inside of the oven and the oven racks. We then let it sit for 15 minutes and wiped the inside of the oven with PAPER TOWELS. There were two spots that the oven had some really baked on grease, to the point that it was crusty, and we simply sprayed a soft scour pad sponge with the BT200, lightly scrubbed the spots, and the stains came up easily.

The BT200 also cleaned all the splatters off the oven window and door. The oven looked brand new when we were done.

The EATOILS BT200 is the only cleaner you need for tough cleaning jobs like ovens, barb-b-cue pits and grills, pot's and pans, and other items that can get baked on grease and grime on them.

The best part is the price. A quart of BT200 diluted at 6 ounces to a gallon of water cost's the consumer less than .80 cents. Compare that to store bought cleaners that run $3.00-$4.00. Plus the BT200 is totally safe to use, contains zero harmful ingredients, and takes a lot less time.

For more information please visit us at http://www.cleanandgreensoltuions.com/ or call us at 281.883.8470

MULIZORB SELECT - OIL ONLY ABSORBENT

With all of the hustle and bustle of the current BP Oil/Horizon spill in the Gulf of Mexico this month we have been actively working with our agents and distributors in the region to address the burgeoning disaster. As days go by, the extent of the damage caused by this disaster is growing to become the biggest commercial spill in history. Due to the size of the problem, virtually all technologies are being tested so that every opportunity to address the clean-up can be put to use.

Among the many products we are discussing with BP, the responders and regulatory authorities is the amazing absorbent - MULTIZORB SELECT - OIL ONLY ABSORBENT. This product floats on water and will absorb the oil right off the surface of the water - just spread it on the water and the oil will absorb into the product and you can scoop or vacuum the product off the water and dispose of it in a landfill or incinerate it. This product was used successfully in the Exxon Valdez spill and in every major spill since that time. Most recently, last month it was successfully used to capture floating oils in a major spill in Australia.

MULTIZORB is a byproduct of volcanic eruption so it is based on a renewable resource and its impact on the environment is minimal. It is a cost effective alternative solution to other popular spill response absorbent products.

For more information please contact us at Clean and Green Solutions at 281.883.8470 or visit our web site at www.cleanandgreensolutions.com

Cleaning a Trex Deck with BT200

Trex is the leading brand of alternative decking, railing, fencing, and trim products designed to maximize your outdoor living experience.

Trex composite products are made of a unique combination of wood and plastic fibers. Trex gets its plastic and wood fibers from reclaimed or recycled resources. Including sawdust and used pallets from woodworking operations, and recycled plastic grocery bags from all over the country.

According to the Trex Website, the are a variety of ways and harmful chemicals that are to be used when cleaning a Trex Deck. Deck Brightners, Bleach, and even cleaners containing dangerous acids are recommended by Trex to clean mold and mildew, grease, oil, food stains, and many others.

Well, we have great news for you. The EATOILS BT200 Certified GREEN degreaser is the ONLY product that you need.

Recently Pro Power Wash, a sister company of Clean and Green Solutions, of Porter, TX was called to the home of Mrs. Kathy Sexton, of Kingwood, TX. Mrs. Sexton had tried 4 other cleaning companies try to clean her TREX Deck and all produced unsatisfactory results. Basically, they could not get it clean, even using bleach.

Pro Power Wash used the EATOILS BT200 Green Degreaser at a rate of 6 ounces of BT200 to 1 gallon of water. (Total Used was 12 ounces and 2 gallons of water). Using a garden type pump up sprayer, the BT200 solution was sprayed on the deck in small areas at a time. The solution was then agitated into the deck lightly with the use of a street broom, just until a white lather formed. The BT200 was allowed to sit for approximately 15-20 minutes and then rinsed with a power washer lightly using no more than 1000 PSI at about 1-2 feet from the surface.

Mrs. Sexton was extremely satisfied and could not believe the results. She has also purchased a quart of the BT200. Because of how easy the BT200 is to use, not to mention that is totally safe, she will now be able to keep her TREX Deck clean herself year round.
(The dark spot in the after picutre is water that leaked form a garden hose as the workers put it away)

For more information please vist us at www.cleanandgreensolutions.com or call us at 281.883.8470

CLEANING UP MOLD AND MILDEW ON OUTDOOR SURFACES-SAFELY

How can you get rid of mold and mildew on fences, decks, concrete and stone work, patio furniture, vinyl awnings & gazebos, shelters, etc without using harsh chemicals?

Over the years we have encountered a number of situations where mold & mildew have attacked surfaces and left a serious discoloration. As we do not like to use bleaches or other harsh chemicals in anything that we do we have found that EATOILS™ BT200™ is an ideal mold & mildew cleaner and preventer.

Just mix at approx. 4 oz per gallon of water and spray it on the surface to wet it down. Wait for about 30 minutes and agitate with a stiff brush (for softer materials use a softer brush) - you'll see the mold and mildew break down and release from the surface. Rinse and repeat. Older problems will take multiple applications. The mold & mildew will disappear and the residual product will help to prevent re-infestation.

We have tried this approach on all kinds of surfaces and the product will not harm the surface in any way as there are no harmful chemicals, solvents, or damaging materials whatsoever in the product. In fact, the product is ECOLOGO™ certified GREEN and safe for the environment.

If you can't get it clean with traditional cleaning products, give us a call - we may have the answer for you. Call us at 281.883.8470 or visit our website at http://www.cleanandgreensolutions.com/